R2800 Radial Engine (Special price)

FREE Shipping Limited Offer

Rated 5/5 based on 4 reviews.
$15,450.00
In Stock


Calculate Shipping



flat rate - $0.00

Local - $0.00

International - $0.00

Contact sales@rotecaerosport.com or call us on 920-267-7001 (Toll Free - US customers only), +61 3 5977 3805 (Local)

For more information please contact sales@rotecaerosport.com or call us on 920-267-7001 (Toll Free - US customers only), +61 3 5977 3805 (Local) 

Accompanying Standard items
• 1 x Starter Motor
• 2 x Ignition Module with Heat Sink
• 2 x Ignition Coil
• 2 x Ignition Wiring Harness
• 1 x Oil Filter
• 2 x Rotor Buttons
• 1 x Scavenge Filter
• 1 x Prop Washer R28 
• 1 x Engine Manual CD
• 1 x Oil Filter Block

 Designers Matthew & Paul Chernikeeff
Configuration Seven Cylinder Radial Engine
– Four Stroke
Capacity 2800 cc (172 ci)
Total Diameter 800 mm (31.5 ”)
Dry Weight 100 kg (220 lbs)
Propeller / RPM Fixed 76 ” Diameter x 55 ”
Pitch @ 2,450 rpm
Ignition / Type Dual, electronic and magneto
Carburettor TBI-40-S / Bing
Mixture Control
 Lubrication Geared Oil Pressure and
Scavenge Pump
Bore / Stroke (3.15 ”) 80 mm x 80 mm
Heads Two Overhead Valves,
Push Rod Operated
Spark Plugs Two per Head
(NGK DCPR8E)
Starter Electric Auto Type 12 Volt
Charging System 45 Amp Alternator
Fuel Consumption Avgas 100LL – 22 liters
(5.8 gallons) @ 75% Power
Rated Power 110 hp @ 2450 Prop RPM
(Via 3:2 PSRU)

 

(171)

 Designers Matthew & Paul Chernikeeff
Configuration Seven Cylinder Radial Engine
– Four Stroke
Capacity 2800 cc (172 ci)
Total Diameter 800 mm (31.5 ”)
Dry Weight 100 kg (220 lbs)
Propeller / RPM Fixed 76 ” Diameter x 55 ”
Pitch @ 2,450 rpm
Ignition / Type Dual, electronic and magneto
Carburettor TBI-40-S / Bing
Mixture Control
 Lubrication Geared Oil Pressure and
Scavenge Pump
Bore / Stroke (3.15 ”) 80 mm x 80 mm
Heads Two Overhead Valves,
Push Rod Operated
Spark Plugs Two per Head
(NGK DCPR8E)
Starter Electric Auto Type 12 Volt
Charging System 45 Amp Alternator
Fuel Consumption Avgas 100LL – 22 liters
(5.8 gallons) @ 75% Power
Rated Power 110 hp @ 2450 Prop RPM
(Via 3:2 PSRU)
SKU 171
Shipping Weight 50.0000kg

R2800 powered Sopwith Camel

15 July 2021
Hi Paul, I wanted to send you a quick email to share that I finally got my Sopwith Camel in the air. My R2800 ran like a top!!! I couldn’t believe how nicely it pulls the plane around. Here is a link to the first flight video if you would like to see it https://www.youtube.com/watch?v=9eKij1CjXYA I couldn't be happier with my R2800, right out of the box I knew it would be the right engine for me. Assembly to the airframe and installation was a breeze. The instructions and information made sure that there was no guess work. My R2800 outperforms any expectation that I had in flight, powerful, smooth and sexy at the same time! Thanks to all of the folks at Rotec for making an engine that helped make my dreams come true. Regards, Chris Bryant
(5)

R2800 powered Sopwith Camel

15 July 2021
Hi Paul, I wanted to send you a quick email to share that I finally got my Sopwith Camel in the air. My R2800 ran like a top!!! I couldn’t believe how nicely it pulls the plane around. Here is a link to the first flight video if you would like to see it https://www.youtube.com/watch?v=9eKij1CjXYA I couldn't be happier with my R2800, right out of the box I knew it would be the right engine for me. Assembly to the airframe and installation was a breeze. The instructions and information made sure that there was no guess work. My R2800 outperforms any expectation that I had in flight, powerful, smooth and sexy at the same time! Thanks to all of the folks at Rotec for making an engine that helped make my dreams come true. Regards, Chris Bryant
(5)

Looks beautiful! Sounds beautiful! Runs powerful!!

22 April 2017
I am still feeling the rush of a successful first flight of "Little Stearman" powered by a beautiful R2800! My project received its airworthiness certificate on June 26th - but with the arrival of kids and grandkids I couldn't get time to concentrate on the first flight until yesterday morning, July 11th. I had done much taxi testing, but was totally unprepared for the smooth and rapid acceleration as I advanced the throttle with no brakes or tie-down. I'll bet I was off the ground in 250 to 300 feet. The engine ran perfectly - smooth as glass, with PLENTY of power. I flew for about a half an hour before landing with a huge grin on my face! I have attached a couple of pictures - but I still have to get some close-up flight photos. There were many comments of those on the ground of how nice that radial looked and sounded on this project. I have some routine trim adjustments to make - and then I'll get some in-flight photos from a chase plane. The attached photos give you an idea of how the aircraft looks on the ground - and then some long distance take-off photos of the first flight.
(5)

Amazing product!

22 April 2017
I have a Kitfox Classic IV with a Rotec R2800 on the nose. I can't tell you how much I have enjoyed that engine since I first got it. The folks at Rotec have been absolutely outstanding to work with any time there has been any questions or issues that have arose. They have always contacted me promptly with answers to any questions or concerns I had, and have always shown the utmost in professionalism and respect in their dealings with me. I have been in the aviation industry for nearly 40 years now and have dealt with manufacturers of piston engines, turbo prop engines and jet engines. Without any doubt these guys rank right up there with the best of them for product support. This little motor is their passion. Every time I hear someone who references the negative stuff on the internet, I have to pause and remember how many negative comments I have heard about "those damned Lycoming, Continental or even Rotax engines!" If you are thinking about purchasing a Rotec and are concerned about their support... put your mind at ease. These guys have a great product that runs smooth, sounds outstanding, has plenty of power and absolutely has all the aesthetic qualities the others wish they had. Guaranteed you will not draw a crowd to look at your new "Brand X" motor like you will with the Rotec Radial!
(5)

Write a product review


We Also Recommend


R2800 Engine Mount

R2800 Engine Mount

$1,690.00

Oil Tank For R2800 Engine (8L)

Oil Tank For R2800 Engine (8L)

$1,190.00

Rotec Gauge Kit

Rotec Gauge Kit

$1,475.00

Oil Scavenge Clean Kit

Oil Scavenge Clean Kit

$489.00


Others Also Bought


Rotec Gauge Kit

Rotec Gauge Kit

$1,475.00


More From This Category


R3600 Radial Engine (Special Price)

R3600 Radial Engine (Special Price)

$19,980.00